{"id":98,"date":"2018-11-19T20:00:09","date_gmt":"2018-11-19T19:00:09","guid":{"rendered":"https:\/\/trioptics.com\/us\/?page_id=98"},"modified":"2024-04-23T15:13:49","modified_gmt":"2024-04-23T13:13:49","slug":"automotive","status":"publish","type":"page","link":"https:\/\/trioptics.com\/us\/markets-solutions\/automotive\/","title":{"rendered":"Automotive"},"content":{"rendered":"

<\/div><\/div><\/div><\/div>

Solutions for the automotive industry<\/p><\/h1><\/div>

TRIOPTICS brings the complex driver assistance systems of the automotive industry onto the road.<\/h2><\/div>

We support manufacturers and suppliers in their task of ensuring the quality, longevity and sustainability of their systems. Our system solutions for active alignment and assembly enable the mass production of camera modules with appropriate testing technology. Get to know some of our innovations, which are extremely important for autonomous vehicles. Make the change.<\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>
\"TRIOPTICS<\/span><\/div>
<\/div>

Active alignment of ADAS cameras<\/h2><\/div>

Even with a perfect lens system, the image quality of a complete camera deteriorates if the lens is poorly aligned with the sensor. This effect is amplified with the increasing performance of camera modules and the higher resolution of sensors. For this reason, the high-precision active alignment of optics and sensor is necessary in the production of camera modules. With our ProCam\u00ae<\/sup><\/a><\/strong> technology, the sensor is aligned with the camera optics in up to six degrees of freedom with sub-micron\/sub-arcmin resolution. The components are focused, centered, tilt adjusted and rotated in one single alignment step.<\/p>\n<\/div>

<\/div><\/div><\/div>
\"Camera<\/span><\/div>
<\/div>

Testing of ADAS cameras<\/h2><\/div>

The use of complex camera systems for safety-related and automated object recognition and classification leads to higher demands on the characterization of the image quality of camera modules. This means that the entire test chain must also meet these new requirements. For this purpose, TRIOPTICS offers end-of-line test systems with CamTest<\/a><\/strong> which, in addition to the usual optical and opto-mechanical parameters such as MTF, SFR, defocus, tilt and rotation of the image plane, also covers additional sensor test parameters. These include OECF, dynamic range, white balance, relative illumination, spectral response and more.<\/p>\n<\/div>

<\/div><\/div><\/div>
\"TRIOPTICS<\/span><\/div>
<\/div>

Alignment and testing of LiDAR systems<\/h2><\/div>

There is one thing that Flash-LiDAR, solid-state LiDAR or mechanical LiDAR scanning systems certainly have in common:
\nThe interaction of the optics and sensor chip of the emitter and receiver unit of the LiDAR sensor must be absolutely precise and perfectly aligned.
\nIf the components are not precisely positioned, objects and distances cannot be reliably detected. In the worst case, this could compromise the safety of autonomous vehicles. Accordingly, perfect performance must be ensured from the first sample to the series product. We are happy to support you in choosing the right production method and manufacture the important first LiDAR prototypes together with you.<\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>
\"YouTube\"

Mit dem Laden des Videos akzeptieren Sie die Datenschutzerkl\u00e4rung von YouTube.
Mehr erfahren<\/a><\/p>

Video laden<\/a><\/p>